Visual Basic for Applications LinkedIn assessment answers 2023

Hello Friends, In this post, you will find here Visual Basic for Applications LinkedIn assessment answers. This is a part of the LinkedIn skill assessments. This assessment test consists of 15-20 MCQs to Check your knowledge of Visual Basic for Applications.

Use “Ctrl+F” To Find Any Questions or Answers. For Mobile Users, You Just Need To Click On Three dots In Your Browser & You Will Get A “Find” Option There. Use These Options to Get Any Random Questions Answers.

100% Free Updated Visual Basic for Applications LinkedIn assessment Certification Exam Questions & Answers.

Visual Basic for Applications LinkedIn assessment answers

Q1. Which two sets of values are printed by this function and sub?

Function GetVitals(ID As Long, Age As Long, Optional Weight As Long) As String
    GetVitals="ID=" & ID &"Age=" & Age & "Weight=" & Weight
End Function
Sub ShowVitals()
    Dim ID As Long, Age As Long,Weight as Long
    Debug.Print GetVitals(ID:=5,Age:=20)
    Debug.Print GetVitals(ID:=6,Age:=25,Weight:=130)
End Sub

ID=5 Age = 20 Weight=
ID=6 Age = 25 Weight=130

ID=5 Age = 20 Weight=0
ID=6 Age = 25 Weight=130

ID=5 Age = 20 Weight=Null
ID=6 Age = 25 Weight=130

ID=5 Age = 20
ID=6 Age = 25 Weight=130

Q2. This code shows the first statement of CalledSub. Which calling statement will work properly?

Sub CalledSub(Surname, Age)

call Calledsub “smith”,26
calledsub (surname=”smith”, Age = 26)
calledsub (Surname:=”Smith”, Age:=26)
calledsub “smith”, 26

Q3. What is the principal difference between a class and an object?

There is no meaningful difference. The terms are used interchangeably.
A class declares an object’s properties. An object completes the declaration by defining events and methods.
An object is a template for a class.
A class describes the design of an object. An object is an instance of that design.

Q4. What value does the MsgBox statement display?

Sub MySub(VarA As Long, ParamArray VarB() As Variant)
MsgBox VarB(0)
End Sub
Sub ShowValue()
Call MySub(10, "First arg", 2, 3.1416)
End Sub

2
10
First arg
3.1416

Q5. What object is needed to put a userform module in a VBA project?

associated standard code module
UserForm
associated class module
userForm class

Q6. What is the output?

Sub UseSum()
Dim TestArray() As Integer, Total As Integer
ReDim TestArray(1)
TestArray(1) = 6
ReDim TestArray(2)
TestArray(2) = 3
Total = WorksheetFunction.Sum(TestArray)
End Sub

Q7. The Driver subroutine is declared by Sub Driver (Y). Which statement results in a compile error?

Driver x
call Driver(x)
call Driver x
Driver (X)

Q8. You have several variables to display on a user form, and there are too many variables to display at once. Which control best enables the user to see all the variables?

Frame
multipage
TabStrip
ListBox

Q9. Below is a function named SquareIt. Which version of the subroutine named Area results in a compile error?

Function SquareIt(ByRef Basis As Integer) As Long
SquareIt = Basis ^ 2
End Function

sub Area()

Dim Result As Long, Side As Integer
Side = 5
Result = Squarelt(Side)
End Sub

Sub Area()

Dim Result As Long, Side
Side = 5
Result = SquareIt(Cint(Side))
End Sub

Q10. EmailAddress() is an array. It is declared by Dim EmailAddress(10) As String, and option Base 1 is in effect. How many rows and columns are in EmailAddress()?

10 rows and 10 columns
10 rows and 1 column
10 rows and 0 columns
1 row and 10 columns

Q11. Which cell is selected if you run this code?

Range("E3:312").Range("B3").Select

Q12. Which variable name is valid in VBA?

_MyVar
My_Var
My-Var
1MyVar

Reference link

Use the following rules when you name procedures, constants, variables, and arguments in a Visual Basic module: You must use a letter as the first character. You can't use a space, period (.), exclamation mark (!), or the characters @, &, $, # in the name. Name can't exceed 255 characters in length.

Q13. Which is a valid definition of a user-defined data type?

Type CBC
Name As String
Next As String
End Type

Type CBC
Name As String
_Next As String
End Type

Type CBC
Name As String
@Option As String
End Type

Type CBC
Name As String
%For As String
End Type

Q14. What is one way to duplicate a user form from one project into a different project?

Save and close the project with the existing user form.
Click Insert > File.
Browse to the location of the existing project.
Right-click it and select the user-form you want to duplicate.

Open the existing user form in Desing Mode.
Right-click the form and select Copy.
Switch to the other project.
Right-click Module and select Paste.

In the Project Explorer, right-click the user form and select Copy.
Switch to the new project.
Right-click UserForms and select Paste.

Open the existing user form in Design Mode.
Click File > Export File.
Switch to the other project.
Click File > Import File.

Q15. The recording of a macro in Word is likely to be an incomplete record of the user’s actions. Why?

Word’s Macro Recorder does not record actions initiated by keyboard shortcuts.
Word’s Macro Recorder does not support Find & Replace edits.
Word’s Macro Recorder does not record actions initiated by clicking a button on the Ribbon’s Developer tab.
Word’s Macro Recorder does not record actions that inlove selection of text by pointing with the mouse pointer.

Q16. Which statement should precede a subroutine’s error handler?

End
Return
Exit Sub
Stop

Q17. How many values can MyArray hold?

Option Base 0
Sub BuildArray()
Dim MyArray(5) As Integer

0
32,769
5
6

Q18. Which statement is true?

Set establishes a value in a class; Let returns a value from a class.
Let establishes a value in a class; Set returns a value from a class.
Let establishes a value in a class; Get returns a value from a class.
Get establishes a value in a class; Set returns a value from a class.

Q19. A declaration has scope, which has three levels. What are they?

Module, Project and Automation
Procedure, Private Module and Public Module
Subroutine, Module and Project
Procedure, Project and Global

Q20. There are two references that must be selected in the Visual Basic Editor in order for any Visual Basic code to run in Excel. What are these two references?

MS Excel object library and MS Office object library
VBA and MS Office object library
VBA and Excel object library
MS Excel object library and OLE automation

Q21. Which action will cause your project to reset its variables?

Edit the list of arguments of the current routine while in debug mode.
Click End in a run-time error dialog.
Add an ActiveXcontrol to a worksheet.
all of these answers

Q22. Which keyboard shortcut causes VBE to locate the declaration of a procedure?

Shift+F3
Alt+F (Windows) or Option+F (Mac)
Shift+F2
Ctrl+F (Windows) or Command+F (Mac)

Q23. When you define a new class of object, where do you assign a name to it?

in the class module’s name
in the class module’s code
in a standard module’s code
in a standard module’s Properties

Q24. How does a class module indicate that it uses a particular interface?

The interface itself is part of the class module.
by means of the Interface keyword and the name of the interface
by means of the Implements keyword and the name of the interface
The name of the interface is passed as a parameter.

Q25. What is needed for the contents of Module1 to be available to other modules in a VBA project, but not to any other VBA project?

Set Option Global at the top of Module1
Declare module-level variables as Private
Set Module Level Scope at the top of Module1
Set Option Private Module at the top of Module1

Q26. When used with an array named MyArray, what is the preferred way to set beginning and ending values of a loop control variable?

For i = 0 To UBound(MyArray,1)
For i = 1 To UBound(MyArray,1)
For i = LBound(MyArray,1) To UBound(MyArray,1)
It depends on whether Option Base 0 or Option Base 1 is in use.

Q27. What is the value of Test3?

Enum TestEnum
    Test1
    Test2
    Test3
End Enum

Q28. Which statement declares an array?

Dim MyArray() As Integer
Dim MyArray() As Array
Dim MyArray As Integer
Dim MyArray As Array

reference

Q29. To use VBA code to maintain a different VBA project, you can make use of VBA’s extensibility. What is needed to enable extensibility?

Set Macro Security to Trust Access to the VBA Project Object Model
The project’s workbook should be protected in the Ribbon’s Review tab
Include a reference to Microsoft VBA Extensibility 5.3
Include a reference to Microsoft VBA Extensibility 5.3 and set Macro Security to Trust Access to the VBA Project Object Model

Q30. How do you add a user form to a VBA project?

Select the project in the Project window of the Visual Basic Editor
Click the Design Mode button and select Insert Mode

Select the project in the Project window of the Visual Basic Editor
Click the Toolbox button and select UserForm

Select the project in the Project window of the Visual Basic Editor
Right-click the Run menu and select Customize

Select the project in the Project window of the Visual Basic Editor
Click Insert > UserForm

Q31. Explicit variable declaration is required. MyVar is declared at both the module and the procedure level. What is the value of MyVar after first AAA() and then BBB() are run?

Dim MyVar As String
Sub AAA()
Dim MyVar As String
MyVar = "Procedure AAA Scope"
End Sub
Sub BBB()
MyVar = "Procedure BBB Scope"
End Sub

MyVar equals “Procedure AAA Scope”
ISNULL(MyVar) is TRUE
MyVar equals “Procedure BBB Scope”
MyVar is NULL

Q32. Which code block from class modules returns a compile error?

Public Property Get HDL() As Double
HDL = pHDL
End Property
Public Property Let HDL(Value As Double)
pHDL = Value
End Property

Property Get HDL() As Double
HDL = Value
End Property
Property Let HDL(Value As Double)
pHDL = Value
End Property

Public Property Get HDL() As Double
HDL = Value
End Property
Public Property Let HDL(Value As Double)
pHDL = Value
End Property

Public Property Get HDL() As Single
HDL = pHDL
End Property
Public Property Let HDL(Value As Double)
pHDL = Value
End Property

Q33. If VBA code declares FileCount as a constant rather than a variable, the code tends to run faster. Why is this?

The scope of constants is limited to the procedure that declares them
Constants are declared at compile time, but variables are declared at run time
Once declared in a project, the value of a constant cannot be changed. There is no need to look up the current value of FileCount when it is a constant.
The Const declaraton specifies the most efficient type given the constant’s value

Q34. A VBA project must declare four classes. How many class modules are needed?

two (one for the properties and one for the methods)
one (each class is declared in the same module)
four (one for each class)
as many as are required by the variable types that the objects return

Q35. What does this code display?

Sub MakeErrors()
Dim Y As Variant, Z As Variant
On Error Resume Next
Y = 1 / 0
MsgBox "Y = " & Y
On Error GoTo 0
Z - (0 - 3) ^ 0.5
MsgBox "Z = " & Z
End Sub

an error message
Y and Z
Z = in a message box and then a subsequent error message
Y = in a message box and then a subsequent error message

Q36. The VBA code block shown in the following four options runs when UserForm1’s CommandButton1 button is clicked. Which block of code leaves UserForm1 loaded but not visible until the FoundErrors function has checked it, and then enables processing to continue if no errors are found?

Private Sub CommandButton1_Click()
If FoundErrors(Me) Then _
Me.Show
End Sub

Private Sub CommandButton1_Click()
If Not FoundErrors(UserForm1) Then _
Unload UserForm1
End Sub

Private Sub CommandButton1_Click()
Me.Hide
Do While FoundErrors(Me)
Me.Show
Loop
End Sub

Private Sub CommandButton1_Click()
Do While FoundErrors(UserForm1)
UserForm1.show
Loop
End Sub

The first requirement is to make UserForm1 loaded but not visible, therefore we need Me.Hide, Me in here referring to UserForm1

Q37. Which is the correct way to structure a With block?

With Selection
&TypeText Text:="8/24/2019"
&TypeParagraph
&TypeText Text:="1161 Alamosa Drive"
End With

With Selection
.TypeText Text:="8/24/2019"
.TypeParagraph
.TypeText Text:="1161 Alamosa Drive"
End With

With Selection
TypeText Text:="8/24/2019"
TypeParagraph
TypeText Text:="1161 Alamosa Drive"
End With

With Selection:
&TypeText Text:="8/24/2019"
&TypeParagraph
&TypeText Text:="1161 Alamosa Drive"
End With

reference

Q38. Why does this code generate a “Subscript out of range” error?

Sub Example()
    Dim MyArr() As Variant
    ReDim MyArr(3, 4)
    'some code
    ReDim Preserve MyArr(4, 4)
End Sub

Arrays cannot be resized more than once.
MyArr was originally declared with three “rows”.
You can resize only the last dimension of an array when you specify ReDim Preserve.
The correct syntax is ReDim Preserve MyArr(0 To 4, 0 To 4).

Q39. Which subroutine declaration does not cause a compile error?

Sub Called(Salary As Long, ParamArray Vals() As Variant)
Sub Called(ParamArray Vals() As Variant, Salary As Long)
Sub Called(Optional Salary As Long, ParamArray Vals() As Variant)
Sub Called(Salary As Long, ParamArray Vals() As String)

Q40. How can a user enter data on a worksheet or document, or switch windows, while UserForm1 is displayed on the screen?

Show the form with this statement: UserForm1.Show vbModal
Include this statement in the code: UserForm1.Hwnd = False.
Set the user from’s SpecialEffect property to frmShowModal
Set the user from’s ShowModal property to False.

Q41. SubA passes MyVar to SubB. How can you ensure that MyVar has its original value when control returns to SubA?

Declare SubB as Sub SubB(ByRef MyVar).
Declare SubB as Sub SubB(MyVar).
Declare SubB as Sub SubB(Static MyVar).
Declare SubB as Sub SubB(ByVal MyVar).

Q42. Which procedure declaration is syntactically correct?

Sub MySub(VarA As String, Optional VarB _
As Variant, Optional VarC As Long)

Sub MySub(VarA As String, Optional VarB _
As Variant, VarC As Long)

Sub MySub(Optional VarA As String, Optional VarB _
As Variant, VarC as Long)

Sub MySub(OPtional VarA As String, VarB _
As Variant, Optional VarC as Long)

Q43. What are the two principal kinds of procedure in VBA?

Function and Event
Function and Scope
Subroutine and Event
Subroutine and Function

Q44. Which code block compiles without error?

Sub Decs() Dim MyFixed As String * 0 MyFixed = "A" MsgBox MyFixed End Sub
Sub Decs() Dim MyInt% * 1 MyInt = 7 MsgBox MyInt End Sub
Sub Decs() Dim MyInt% As Integer * 1 MyInt = 5 MsgBox MyInt End Sub
Sub Decs() Dim MyInt, MyNum As Integer MyInt = "A" MsgBox MyInt End Sub

Q45. What is used in the Immediate window to display the current value of the variable CountValues?

= CountValues= CountValues
| CountValues| CountValues
: CountValues: CountValues
? CountValues? CountValues

Q46. At which level can you declare a variable in this way: Private TopSecret As String?

function
module
subroutine
procedure

Q47. How can a user enter data on a worksheet or document, or switch windows, while UserForm1 is displayed on the screen?

Show the form with this statement: UserForm1.Show vbModal.
Set the user form’s SpecialEffect property to frmShowModal.
Include this statement in the code: UserForm1.Hwnd = False.
Set the user form’s ShowModal property to False.

Q48. SubA passes MyVar to SubB. How can you ensure that MyVar has its original value when control returns to SubA?

Declare SubB as Sub SubB(Static MyVar).
Declare SubB as Sub SubB(ByVal MyVar).
Declare SubB as Sub SubB(MyVar).
Declare SubB as Sub SubB(ByRef MyVar).

Q49. Arrays cannot be resized more than once.

Sub Example() Dim MyArr() As Variant ReDim MyArr(3, 4) 'some code ReDim Preserve MyArr(4, 4)
End Sub Sub Example() Dim MyArr() As Variant ReDim MyArr(3, 4) 'some code ReDim Preserve MyArr(4, 4) End Sub

The correct syntax is ReDim Preserve MyArr(0 To 4, 0 To 4).
You can resize only the last dimension of an array when you specify ReDim Preserve.
MyArr was originally declared with three “rows.”
Declare SubB as Sub SubB(ByRef MyVar).

Q50. Which block of code ends with the variable i equal to 5 and the variable X equal to 10?

Do
X = X + 1
i = i + 1
Loop Until i < 5
End Sub

Sub Loopi()
Dim X As Integer, i As Integer
For i = 1 To 5
X = X + 1
Next I
End Sub

Sub Loopi()
Dim X As Integer, i As Integer
Do Until i < 5
X = X + 1
i = i + 1
Loop
End Sub

Sub Loopi()
Dim X As Integer, i As Integer
Do
X = X + 1
i = i + 1
Loop While i < 5
End Sub

Q51. How does a class module indicate that it uses a particular interface?

by means of the Implemets keyword and the name of interface.
bymeans of the Interface keyword and the name of the interface.
The name of the interface is passed as a parameter.
The interface itself is part of the class module.

Q52. Which part of the VBE can help you explore VBA syntax?

Locals windows
object browser
project explorer
optional dialog

Q53. This code is trying to establish a new collection consisting of employee names and numbers. Assoc is a class. What statement is missing from the code?

Dim Associates As Collection, Assoc As CAssoc, i As Byte
For i = 1 To 200
    Set Assoc = New CAssoc
    Assoc.Name = Cells(i,1)
    Assoc.Number = Cells(i,2)
    Associates.Add Assoc
Next i

Set Associates = New Collection
Set Associates = Collection
Redim(Associates(Associates.Count+1))
Redim(Associates _ (Unbound(Associates)+1))

Q54. What is the standard term for a variable or value that is passed from one subroutine or function to another?

reference
element
argument
attribute

Q55. What is the standard term for a variable or value that is passed from one subroutine or function to another?

reference
element
argument
attribute

Q56. Where is the event procedure named Worksheet_Change found?

in any standard code module
in the worksheet’s object module
in the Worksheet_Change class module
in the workbook’s code module

Q57. You are building an event procedure for a worksheet, and you edit the argument list in the event procedure’s Sub statement. What happens when the event procedure runs?

There’s no difference compared to the results of a standard procedure.
The results are unpredictable.
The procedure won’t compile.
The procedure throws a run-time error.

Q58. Based on this code, which procedure calls the subroutine SumCosts correctly?

Sub Sumosts(AcctName As String, Amount As Long)
    Range("A1") = AcctName
End Sub

call SumCosts “Totalcosts”, 3
SumCosts “Totalcosts”, 3
SumCosts(“Totalcosts”, 3)
Call SumCosts

Source

Q59. You want to declare an object that describes cars, so that your VBA code can apply tests such as the following. What keyword do you use to declare Cars?

If Cars(1).Make="Ford" And Cars (1).MPG > 20
    Then Cars(1).Selected = True

Dataframe
Type
object
Variant

Q60. What is the purpose of the .Range(“A1:E5”).Select portion of this statement?

ActiveCell.Offset(3,4).Range("A1:E5").Select

If specifies the range that is to be selected after the offset is found
it specifies the range of cells in which the contents of the offset are to be written
It provides Resize information – in this case, the offset returns a reference of five rows and five columns
It specifies the range of cells at which the offset is to be based

Q61. In Excel, what is the effect of the two statements below?

Range("b3:f5, c4:d9").Select
    	Range("b3:f5", "c4:d9").Select

If specifies the range that is to be selected after the offset is found
it specifies the range of cells in which the contents of the offset are to be written
It provides Resize information – in this case, the offset returns a reference of five rows and five columns
It specifies the range of cells at which the offset is to be based

Disclaimer: Hopefully, this article will be useful for you to find all the Visual Basic for Applications LinkedIn assessment answers and grab some premium knowledge with less effort. If this article really helped you in any way then make sure to share it with your friends on social media and let them also know about this amazing Skill Assessment Test. The solution is provided by BrokenProgrammers. This tutorial is only for Educational and Learning purposes.

Next: Windows Server LinkedIn assessment answers 2023